High Frequency Electrosurgical Unit

• Applications

• Widely accepted by clients for its advanced microprocessor control, innovative design and high reliability and is suitable for surgery operations such as general surgery, tumour cutting, chest surgery, orthopaedics, gynecology, neurosurgery, dermatology etc.

• Technical Specifications :

  Working mode	Power	Crest Factor	Vp-p	Load
  Pure cut	350 W	1.7	2100V	500Ω
  Blend cut 1	250 W	2.9	3500V	500Ω
  Blend cut 2	200 W	3.5	3500V	500Ω
  Monopolar coagulation	100 W	4.8	4600V	500Ω
  Bipolar coagulation	50 W	1.4	350V	100Ω
  Weight (net)	20Kg
  Dimensions (wxhxd)	380x170x370 mm
  Rated voltage	220 V ± 10%, 50 Hz     110 V ± 10%, 60 Hz

  

   

   

   

  Electrodes & Accessories

Operating Table

• Features
  Suitable for general surgery, neurosurgery, and Obstetrics-gynecology, etc.
  Configuring the table top for gallbladder, kidney operation is made easy with the composite blend
  The liquid-control system is imported accessories from Germany.
  Excellent manoeuvrablity is stable and safe with low noise
  The whole design meets the requirement of medical equipment standard in china
• Technical specifications
  Height: 1960mm
  Width: 480mm
  Height adjustment: 750－950mm
  Trendelenburg: 22°reverse Trendelenburg: 15°
  Lateral tilt: 15°
  Back plate: +75°/-20°

Orthopedic Attachments

 

Surgical Lamp

• Features
• Surgical Lamp: Completely Meet the Laminar Flow Purification in the Operating Room Fully sealed streamline lid has been designed with aerodynamic principle, which decrease the flow resistance. This design can make the clean laminar flow through the operating area directly and ensure the flow circulation to bring the operating room sterilization and purification
• Surgical Lamp: Excellent Shadowless Effect and Focusing Depth
• Surgical Lamp: Blue Theca Plating Technology
• Surgical Lamp: Adjustable Spring Suspension Arm System in 6 Positions
• Surgical Lamp: Back－up Bulb System
• Surgical Lamp: High Efficiency Bulb
• Surgical Lamp: Adjustable Luminance by Stepless Way
• Technical Specifications

  Ceiling Mount or Mobile Types of Surgical Lamps	Models - F7060 / G7060 / P7060
  Luminance(Lux)	140000+ 140000   120000+ 120000
  Color Temp(K)	4200
  Facular Dimension(mm)	120~280
  Focusing Depth(mm)	700/550
  Temp Increase Sugeron's Head	<2°C
  CRI (Ra)	96
  Power Voltage	~220V 50HZ
  Power(VA)	200+200
  Power of Bulb	150W(24V)
  Life-span of Bulb(h)	1000
  Installation Height(mm)	2750
  Diameter	70cm

Anesthesia Machine

• Features

• The anesthesia machine follows the technical standard,the quality standard.  It is designed to make the machine more economical. 

• New concept of valve project is introduced to guarantee the macine´s clinical use and stable performance.

• The machine is recommended by financial support from the world Bank. 

• Applications: adult and child

• Working mode: For the closed system,half-closed system and half-open system

• Pneumatic driven and microcontroller controlled

• Technical Specifications

• • Flowmeter:
  •   O2/N2o four-tube fiowmeter
  •   Slim tube:0.1-2L/min
  •   Thick tube:2.5-10L/min
  • Oxygen Failure Protection Device:
  •   When Oxygen supply pressure is deficient,               •   N2o   fiow graduaiiy decreases till cut-off.                •   During the process, O2 concentration - above25%   • Safety Performance:
  •    Alarm for oxygen supply failure
  •    A gas cut-off device to cut-off supply of N2O when triggered by low oxygen suppiy pressure
  • Safety valve:
  •   O2 flush:
  •   35-75L/min
  • Gas Supplies:
  •   O2:0.3-0.4MPa
  •   N2o:0.3-0.4MPa

• • Ventilation modes:IPPV
  • Monitor
  •   Tidal Volume:0mL-1000mL
  •   Display Tidal Volume and Respiratory Rate            •   Manual Mode (0hmeda flowmeasuring system)
  •   Peak airway pressure for patient
  •Settings
  •   Respiratory rate:6-40bpm
  •   I/ERatio:1:1 2:3 1:2 1:3
  •Alarms
  •   Upper airway pressure limit:2-6kPa
  •   Lower airway pressure limit:0-2kPa
  •  Silence time for Alarm:less than 120seconds

Anesthesia Workstation Machine  

• Features

• Applications: adult and child

• Working Modes: Closed system, half-closed system and half-open system

• Driven mode:  Pneumatic driven and microcontroller controlled

• · Ventilation mode:                                   •   IPPV SIPPV SIMV CPAP SIGH
  Respiralory rate:                                       •   6bpm-60bpm
  I/E Ratio:                                                  •   1:0.5、1:1 、1:1.5、1:2、1:3
  Tidal Volume:                                           •   80mL-1200mL,Display Tidal Volume and Respiratory Rate for Manual Mode (Ohmeda flow measuring system)
  Trigger sensitivity:                                   •   0-2kPa (compared to PEEP)
  Colored LCD+high-luminance LED display
  Waveform:                                               •   Airway pressure waveform
  Monitoring parameters:
  •   Minute volume
  •   Respiratory rate
  •   Airway pressure (Ppeak Pmean PEEP)
  Alarms:
  •   Upper or Lower airway pressure limit
  •   Upper or Lower tidal volume limit
  •   Upper or Lower minute volume limit
  •   Apnea:
  •   Power supply failure
  •   Trend curve:full parameters 24-hour trend curve
  •   Communication port:RS-232
   

Medical Soda Lime

Child / Pediatric Ventilators

• Features

• Inhaled tidal volume

• Total respiratory rate

• Airway pressure
• Trigger indication
• Technical Specifications
• • Ventilation Mode:  •   IPPV, SIPPV, SIMV (f/2, f/4), CPAP, SIGH
  •   Inhaled oxygen concentration: ≤45%
  •   I/E Ratio: 1:1, 1:1.5, 1:2, 1:3, 1:4, 2:1
  • Tidal Volume: •   (VT/) 50ml~1200ml (Ohmeda flow sensor)
  •  Respiratory rate: 6~60bpm
  •  Trigger sensibility: -2kPa ~ -0.1kPa
• • Alarm Mode:                                                                                           •   Upper pressure limit: 2kPa ~ 28kPa
  •   Lower pressure limit: 0kPa ~ 2kPa
  •   Power supply failure: >120s
  •   Silence time for alarm: 2 min
• • Power supply & Others:  AC220V+(-) 22V, 50Hz+(-) 1Hz
  •   Exterior size: 376mm x 246mm x 196mm (L x W x H)
  •   Weight: 9kgs
  •   Gas supply: 0.2MPa ~ 0.6MPa
  •   Ventilator compliance: ≤ 4 x 10 -2ml/Pa
  •   Total noise: ≤ 65dB(A)